Tormek SVM-140 Long Knife Jig

Knife Making Supplies - Best prices, selection and service. Visit us Today!1.
Tormek SVM-140 Long Knife Jig **Please note these will be dropped shipped to you directly from Tormek** The Tormek original grinding jig SVM-140 has been developed especially for long and flexible knives, e.g. fillet knives. It's larger width, 140 mm (5½), stabilizes a long and thin blade and the jig copes with blades longer than 160 mm (6¼). A Durable Edge: Compared to grinding methods where you quickly pull the knife through a knife sharpener or sharpen it by using a honing stone, the Tormek knife jigs restore the blade to its original and optimal edge angle. So you do not just sharpen or hone at the very tip of the edge, as you do with honing stones or with a sharpening steel, which causes the edge angle to increase unintentionally. After a few sharpenings by hand, the edge sooner or later will need to be restored to the correct edge angle. Kind to the steel: Since the edge is continuously cooled with water, there is no risk that the steel will become overheated and lose its hardness. You remove the minimum amount of steel so your valuable knives will last for a long time. Superior sharpness: The jig rests on the Universal Support and gives you full control over the edge angle. The burr that develops during sharpening is easily removed on the Tormek Leather Honing Wheel where it is polished to a razor edge. You get a superior sharpness that will last longer. Edge angles for different usage: You can set a suitable edge angle by using the Tormek AngleMaster that comes with the machine. A knife for cutting meat should have a larger edge angle then a knife for cutting vegetables. A small edge angle (25°) will cut easily but it will also be more sensitive to wear and damage. A larger edge angle (40°) will give a stronger and more durable edge. Design: This jig is made especially for long and thin knives. It works in the same way as the SVM-45 jig but it is wider and therefore gives more support to long and thin blades.   The jig comprises an adjustable clamp (1) for holding knives of any thickness and an adjustable stop (2). You adjust the jig to the knife thickness with the screw (3). You lock the tool by tightening the knob (4).   The jig rests on the Universal Support. The exact edge angle is set by rotating the stop or with the Micro Adjust on the Universal Support. The Universal Support is placed vertically for grinding towards the edge. Click here for more information!      

Tormek SVM Dispositif d'affûtage de couteaux de 140 mm de long

HOME ACCESSORIES TORMEK KIT

Tormek Long Knife Jig - Lee Valley Tools

Centers long, flexible knife blades in the jig for optimal, symmetrical results. The 5 1/2 wide clamp stabilizes flexible blades. An extra stop for

Tormek KJ-140 Wide Centering Knife Jig. For long, flexible knives. The Knife Jig that Turns Your Tormek Sharpening System T-8, T-7, T-4, T-3, etc.

Tormek TBO-355 Outdoorsman Jig, Axe & Knife Sharpening Bundle - VMTW, L.L.C.

TORMEK SVP-80 Profile Knife Jig

Tormek NEW Hand Tool Kit HTK-806

The new Small Knife Holder SVM-00 from Tormek works in conjunction with the Tormek Knife Jig SVM-45 to give you complete sharpening control on a much wider range of small knives. You can now sharpen knives of different shapes for whittling, chip carving and detail work. Even folding pocket knives can be sharpened with perfect control. Since it is the handle of the knife that is mounted in the SVM-00 holder, there is really no limit to how small a blade you can sharpen.

Tormek SVM-00 Small Knife Holder Jig

TORMEK SVM-140

KJ-140 Wide Centering Knife Jig - Tormek

Long Knife Blade Sharpening Jig Tormek SVM-140. The Knife Jig Handles Flexible, Thinner Knives Like Filleting Knives - Works With Your Tormek Sharpening System T-8, T-7, T-4, T-3, etc. in Dubai